![background image](http://html2.mh-extra.com/html/icom/ip501m/ip501m_operating-manual_3643233010.webp)
1
BeFORe uSIng
1-8
■
Function Display
Panel Description
Example: When receiving a
custom message
Standby screen
10/14 12:00
All
10/14 13:00
everyone meet nOW
: Signal strength
The signal strength is represented by 3 bars.
L
When the transceiver location is out of the service area, or cannot receive the control signal, the (out-of-area)
icon blinks.
L
If the IP501M has not been authenticated, is displayed.
:
Call types
Shows the call type.
Blinks when a call or message is received.
: All/group Call
: Talkgroup Call*
: Individual Call
: Phone Call*
* May be usable, depending on a presetting.
:
Displayed when the transceiver is connected to Bluetooth device.
:
•Displayed when the Pocket Beep function is On.
•Blinks when a call is received. This icon blinks until the transceiver return to the standby mode after a received signal
disappears.
:
Displayed when the P-Bell function is used.
:
Key Lock
Displayed when Key Lock function is On.
:
GPS
•Displayed when valid position data is received.
•Blinks when searching for satellites or calculating position data.
Scrolls, depending on the message length