![background image](http://html2.mh-extra.com/html/icom/ip501m/ip501m_operating-manual_3643233023.webp)
4
Set moDe
4-3
Set mode items
LoG
Deletes logs.
L
Select “CLR,” and then push [Call History] to delete.
– – –, CLR
– – –
ReSet
Resets the transceiver to its defaults, except for
the Bluetooth pairing list.
L
Select “YeS,” and then push [Call History] to reset.
L
the transceiver automatically restarts.
No or YeS
No
FIRm UP
Updates the transceiverʼs firmware.
L
Select “YeS,” and then push [Call History] to reset.
L
the transceiver automatically restarts.
L
Updating the firmware takes approximately 10
minutes.
No or YeS
No
Success tone
Selects whether or not to enable the tone that
indicates an individual call was successfully
transmitted.
L
the transmission result is also displayed on the
screen.
enable or Disable
enable
Failure tone
Selects whether or not to enable the tone that
indicates an individual call failed.
L
the transmission result is also displayed on the
screen.
enable or Disable
enable
Call tone
(IND/GRP/ALL/
teL)
Sets the Call Initiation tone.
Disable, tone1 ~ tone8
L
Larger number makes
the tone lower.
tone1 (Pi)
Crtsy Beep
(IND/GRP/ALL/
teL)
Sets the Call termination beep.
Disable, tone1 ~ tone8
L
Larger number makes
the beep lower.
tone1 (Pi)
RX tone
(IND/GRP/ALL/
teL/mSG)
Sets the Call Receive tone.
Disable, tone1 ~ tone8
L
Larger number makes
the tone lower.
Disable
Notify type
(IND/GRP/ALL/
teL)
Sets the call receive notification type.
P-Bell or Pocket beep
P-Bell
Notify No.
(IND/GRP/ALL/
teL/mSG)
Sets the number of tones.
Continuous (except for
“MSG”), 1, 3, 10, 20
(times)
3 (times)
RX Notify Vol.
Sets the call or message received notification
volume.
0 ~ 32
10
out of Rng tone Selects whether or not to enable the out-of-Area
Warning Beep. the beep also sounds when the
transceiver reenters the service area.
(out-of-area: “Pipi,” Reenters: “Popo”)
Disable or enable
Disable
VoX
Selects a VoX function option.
the function automatically switches between
receive and transmit by detecting your voice.
Disable, Bluetooth mic
Disable
the shaded items are also displayed in the Basic Set mode.
L
Items or default values may be different, depending on the transceiverʼs version or presettings. Ask your dealer for
details.
Item
Description
Option/range
Default