![background image](http://html2.mh-extra.com/html/icom/ip501m/ip501m_operating-manual_3643233025.webp)
4
Set moDe
4-5
Set mode items
the shaded items are also displayed in the Basic Set mode.
L
Items or default values may be different, depending on the transceiverʼs version or presettings. Ask your dealer for
details.
Item
Description
Option/range
Default
Bt Auto Connect*
1
Selects whether or not to automatically connect a
Bluetooth device.
enable or Disable
enable
Bt Sync Vol.*
1
Selects whether or not to synchronize the Bluetooth
headsetʼs volume level with the transceiverʼs
volume level.
L
When “Enableˮ is selected, the Bluetooth headset
volume can be set by rotating [DIAL].
Disable or enable
Disable
Bt Connect
type*
1
Selects the Synchronous Connection-oriented
(SCo) link*
4
connection type of a Bluetooth
headset.
When “Auto Disconnect” is selected, the SCo link
is automatically disconnected after 2 seconds.
*
4
A Bluetooth link for voice communication.
L
this setting is valid only when a Bluetooth device
other than a VS-3 is used.
L
When this item is set to “Auto Disconnect,” the VoX
function is not usable.
Always Connect or Auto
Disconnect
Always
Connect
Ptt & mic
Switch*
1
enables the user to select which microphone to
use.
L
When this item is set to “Auto,” transmits the audio
from the device whose [Ptt] is pushed.
Auto, Bluetooth mic, or
Radio mic
Auto
Bt AF output*
1
Selects the AF output device when a Bluetooth
headset is connected.
Bt only, Bt & SP
Bt only
Bt echo
Canceller*
1
Selects whether or not to enable the Bluetooth
headsetʼs Echo Canceller.
enable or Disable
enable
Bt e-Cancel
Gain*
1
Sets the echo Canceller input gain for a Bluetooth
headset.
–40 dB ~ +40 dB
0 dB
Bt e-Cancel
Delay*
1
Sets the echo Canceller delay for a Bluetooth
headset.
0milliseconds ~
160milliseconds
35milli-
seconds
Bt Noise Cancel*
1
Selects whether or not to enable the Bluetooth
headsetʼs Noise Canceller.
enable or Disable
enable
Bt Power Save*
1
Selects whether or not to enable the Bluetooth
headsetʼs Power Save function.
L
When “Enableˮ is selected, the Power Save function
automatically activates after 2 minutes of no
communication.
Disable or enable
Disable
*
1
Displayed only when “enable” is selected in the “Bluetooth” item.