Icom IM323 Скачать руководство пользователя страница 66

Страница: 66 / 100

DSC OPERATION

Receiving an All Ships Call

When an All Ships Call is received:

The alarm sounds for 2 minutes.

➥

“RCVD ALL SHIPS CALL” pops up. The backlight may blink

➥

for 2 minutes, depending on the received Category.

Push [ALARM OFF] to stop the alarm and the blinking

backlight.

฀ •฀฀If฀[ALARM฀OFF]฀is฀not฀pushed฀within฀2฀minutes,฀the฀next฀screen฀

may appear, depending on the received Category.

Push a softkey to select your desired action.

[IGN]

Push to ignore the Call and return to the normal operat-

➥

ing mode.

฀ ฀

•฀The฀transceiver฀exits฀the฀DSC฀mode.

฀ ฀

•฀฀“฀

” continues to blink and the Call is stored in the Received

Call Log.

[INFO]

Push to display the Received call information. (p. 58)

➥

[ACPT]

Push to monitor the channel specified by the calling

➥

station (Example: 16) for an announcement from the
calling station.

Содержание IM323





































































































Результаты поиска

Содержание IM323

Отзывы:

Бренды по названию

Популярные бренды

Icom IM323, Инструкция по эксплуатации

Результаты поиска

Содержание IM323

Отзывы:

Бренды по названию

Популярные бренды