Icom IM323, Инструкция по эксплуатации

Страница: 29 / 100

19
7
DSC OPERATION
DSC address ID
■
Programming Individual ID
D
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
Enter “INDIVIDUAL ID” in the DSC SETTINGS menu.
q
Push [ADD].
w
฀ •฀The฀“INDIVIDUAL฀ID”฀program฀screen฀is฀displayed.
Enter a desired individual ID in the following way:
e
฀ •฀Select฀a฀desired฀number฀using฀Dial,฀or฀[
Y
]/[
Z
]/[
Ω
]/[
≈
].
฀ •฀Push฀[ENT]฀or฀Dial฀to฀set฀it.
฀ •฀฀To฀move฀the฀cursor,฀select฀either฀arrow,฀“
←
” or “
→
,” then push
[ENT] or Dial.
฀ •฀Push฀[EXIT]฀to฀return฀to฀the฀normal฀operating฀mode.
฀ •฀Push฀[BACK]฀to฀return฀to฀the฀previous฀screen.
The first digit is specified as ‘0,’ and the second digit is
other than ‘0’for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
Repeat step
r e
to enter all 9 digits.
After entering the 9 digit code, push [ENT] or Dial to set it.
t
฀ •฀ID฀name฀programming฀screen฀is฀displayed.
Enter a desired 10 digit ID name in the following way:
y
฀ •฀Select฀a฀desired฀character฀using฀Dial,฀or฀[
Y
]/[
Z
]/[
Ω
]/[
≈
].
฀ •฀Push฀[ENT]฀or฀Dial฀to฀set฀it.
฀ •฀฀To฀move฀the฀cursor,฀select฀either฀arrow,฀“
←
” or “
→
,” then push
[ENT] or Dial.
฀ •฀Push฀[123],฀[!$?]฀or฀[ABC]฀to฀select฀a฀character฀group.
After entering the ID name, select “FINISH” using Dial, or
u
[
Y
]/[
Z
]/[
Ω
]/[
≈
], then push [ENT] or Dial to program it.
฀ •฀The฀“INDIVIDUAL฀ID”฀list฀screen฀is฀displayed.
Push [MENU] to exit the MENU screen.
i
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

MENU

➪

DSC Settings

➪

Individual ID

(Push [MENU]) (Rotate Dial, then push [ENT].)