Icom iF610, Инструкция по эксплуатации

Страница: 19 / 36

14
3
RECEIVING
D D
Reception of a Group Call
You can receive a group call with a pre-programmed group
code number or the group code that has been selected via
[
]/[ ].
When a group call is received, the beep sound is emitted and
you immediately are able to communicate.
q
The LCD screen displays the caller’s individual code.
➥
In the case of a call received from the Inter-Prefix,
‘INTER-PFIX’ is displayed on the LCD screen.
➥
The communication time timer will appear on the display.
w
The individual ID will appear if ‘Display Pressel’ function is
enabled, and remain displayed during the current commu-
nication.
e
Pushing [PTT] will allow you to talk with the caller.
➥
In the case of a group call, the communication only can
be cleared down from the caller’s side. The called sta-
tion cannot clear down the communication.
D D
Reception of a Status Call
When a status call is received, a beep sound is heard.
q
The LCD screen displays the text corresponding to the sta-
tus number and the caller’s individual code.
w
These text and the individual numbers remain until [Clear]
is pushed.
e
If you push [Clear] to cancel the displayed status call, the
transceiver returns to the waiting mode.
D D
Reception of a SDM (Short Data Message) Call
When the Short Data Message is received, a beep sound is
heard.
q
The LCD screen displays the received data and the
caller’s individual code, and then the display blinks.
w
Push [ ]/[ ] to display the following data when over 10
digits of data has been received.
e
No transmission can be made until the displayed data
message is cancelled by pushing [Clear].
r
If you push [Clear] to cancel the displayed short data mes-
sage, the transceiver returns to the waiting mode.
TIME 00 56
STATUS 01
302
(DATA)
302
GRP 200
IC-F610_F620_MPT_1.qxd 05.8.22 6:07 PM Page 14 (1,1)