background image

2

BATTERY CHARGE

2-3

 

D

 Using the BC-240 to rapid charge  

the BP-298/BP-299

The BC-240 provides rapid charging of only the  

BP-298/BC-299 Li-ion battery pack. Never use it to 

charge any other battery pack.

Charging time*  

with the BP-298: Approximately 3 hours

with the BP-299: Approximately 4.6 hours

*  When the Extend Battery Life function is turned OFF.  

See the BASIC MANUAL for details.

The following item is additionally required:

A power adapter (not supplied with some transceiver 

versions) or the OPC-515L or CP-23L DC power cable.

CAUTION:

 When using the OPC-515L DC power 

cable 

NEVER

 connect the OPC-515L to a power 

source using reverse polarity. This will ruin the 

battery charger.  White line: 

+

 Black line: 

The optional OPC-515L 

(for a DC power source) 

or CP-23L (for a 12 V 

cigarette lighter socket) 

can be used instead of 

the power adapter.

Power adapter

(A different type, or no power 

adapter is supplied, depending 

on the transceiver version.)

Battery pack + Transceiver

Battery pack

Turn OFF

Using screws are 

recommended to 

secure the charger.

Screws*

(Self tapping screw:

M3.5 × at least 30 mm)

* User supplied

Charging indicator

 •Lights orange:  While charging

 •Lights green:  When charging is completed.

 •Blinks red: 

 When a charging error has 

occurred.

Battery chargers

Содержание IC-V86






















































Отзывы: