5
MEMORY/CALL OPERATION
5-4
Contents of programmed memories can be cleared
(deleted).
1. Push [VFO/MR/CALL] several times to select the
memory or Call channel mode.
•
For only the USA version:
Select any mode other than the weather
channel mode.
2. Push [FUNC], and then push [VFO/MR/CALL].
• “
X
” and “--” blink.
3. Push [
Y
] or [
Z
] to select the channel to be
cleared.
• Memory channels not yet programmed are
blank.
4. Perform the following operation within 1.5
seconds, otherwise the transceiver returns to the
memory mode without clearing memory.
1
Push [FUNC], and then momentarily push
[VFO/MR/CALL].
2
Push [FUNC], and then hold down [VFO/MR/
CALL] for 1 second
• 3 beeps sound, and then the memory
channel is cleared.
5. Push [VFO/MR/CALL] to return to the previous
mode.
BE CAREFUL!
The contents of cleared memories
CANNOT
be recalled.
Example: Clearing memory channel 11.
Push
and then push
.
Push
or
to select channel 11.
Perform the following operation with in 1.5 seconds
Push
, and then push
,
and push
, and then hold down
for 1 second again.
Push
to return to the previous mode.
Clearing memory contents