7-4
7.
TONE SQUELCH AND POCKET BEEP
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Tone/DTCS squelch
Using the HM-133V
microphone
1 Set the operating frequency
2 Push [SET B D-OFF] to enter the Set mode
3 Set the Tone Squelch frequency, or DTCS code
and DTCS polarity
L
4 Push [CLR A MW] to save and exit the Set mode
5 Push [FUNC], and then [SIMP 9 TSQL] or
[HIGH 4 DTCS] to select the desired tone or code
6 Operate normally
L
To manually open the squelch, push [MONI 1 ANM]
When the Tone or DTCS squelch is selected:
When a signal with a matching tone or code is
received, the squelch opens, and audio is heard
L
If a signal with an unmatching tone is received, the
squelch does not open However, the S/RF indicator
shows the strength of the received signal
When the Reverse Tone or DTCS squelch is
selected:
When a signal with a matching tone or code is
received, the squelch remains closed
7 To cancel the Tone or DTCS squelch, push
[FUNC], and then [ENT C T-OFF]
L
The tone icon disappears
Set the operating frequency
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push
to save and exit the Set mode
Operate normally
Example: Setting a Tone squelch frequency and
the Tone squelch.
Push
or
to select the desired Tone Squelch
frequency (Example: 948 Hz)
Push
, and then
to turn ON the Tone squelch
“ ” is displayed
When a signal with a
matching tone is received,
the squelch opens, and
audio is heard
Repeatedly push
or
to select “ ” and “Ct”
Push
to enter the Set mode