background image

3-11

3�

MEMORY OPERATION

The transceiver has a total of 10 banks (A ~ J).

Regular Memory channels 000 ~ 199 and the Scan 

edge channels 1A/1B, 2A/2B, and 3A/3B can be 

assigned to any bank for easy Memory management� 
Up to 100 channels can be assigned to a bank�

Categorizing Memory channels according to their 

types or purposes using Memory Banks is convenient�

You can also use the Memory Bank scan function. 

 

(pp� 4-6, 4-8)

1�  Select the Memory channel to be assigned to the 

bank�

2� 

Push [SET LOCK] to enter the Set mode.

3� 

Repeatedly push [SET LOCK] or [MONI ANM PA] 

to select “BAK” (Bank setting).

4� 

Rotate [DIAL] to select the bank.

5.  Push any key other than [SET LOCK] or 

 

[MONI ANM PA] to save and exit the Set mode.

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR

MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR

MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR

MID
LOW

LOCK

SET

ANM

MONI

DIGITAL PRIO AO BUSY

MUTE
NAR

MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR

MID
LOW

Setting a Memory Bank

Push [SET LOCK] to enter the Set mode.

Example: Setting Memory channel 1 to Bank A.

Repeatedly push [SET LOCK] or [MONI ANM] to 

select “BAK.”

Rotate [DIAL] to select Bank A.

NOTE:

 

 

• The banks are only used to hold Memory 

channels� Therefore, if the original Memory 
channel content has been changed, the Memory 
Bank content is also changed at the same time�

 

To use banks, “BAK” (Bank/Option) must be 

assigned to [BANK OPT]. See page 8-6 for details.

Select Memory channel 1�

Push any key other than [SET LOCK] or 

 

[MONI ANM PA] to save and exit the Set mode.

Содержание IC-V3500


























































































Отзывы: