background image

59

11

OTHER FUNCTIONS

 

Navigation

The transceiver assists you to navigate to a selected destination from your current position.

You can select a AIS target during navigation.

 

L

The function cannot work while in the MOB mode.

NOTE:

 IC-M94D/IC-M94DE’s Navigation function is a supplemental aid to navigation 

only, and is not intended to be a substitute for primary Navigation equipment.

Using 

:

1.  Push 

 on the operating screen.

 •The “Waypoint” screen is displayed.

2. 

Push [▲] or [▼] to select a waypoint.

 

L

Push 

 to sort the waypoints by Name or Range.

3.  Push 

 or [ENT] to start navigation.

 •The plotter screen is displayed, and the transceiver starts to 

navigate

.

 •

 is displayed on the plotter screen.

4.  Push the Software Key below for your next operation. 

(DSC)

Displays the “Compose Other” screen to send 

an Individual call. (p. 28)

 

L

Displayed only when a target is selected.

(Stop)

Stops navigation. (p. 60)

(MOB)

Starts the MOB mode. (p. 58) 

 

L

The transceiver automatically exits the 

Navigation mode.

:

(Range)

Selects the display range. (p. 46)

(Target 

)

Selects the farthest target from your vessel.

(Target 

)

Selects the closest target to your vessel.

(Detail)

Displays the details on the selected target.  

(p. 50)

 

L

Displayed only when the target is selected.

 

L

Push 

 to return the plotter screen.

(List)

Selects the list screen that you want to 

display. (p. 47)

 

D

Starting navigation

There are 3 ways of setting a destination, using 

, selecting on the AIS screen, and 

selecting in the Waypoint list.

NOTE:

 A popup screen is displayed when the vessel arrives at or near the destination. 

To stop the function, push any key.

 

L

When the Audible Alarm function is set to “ON,” an alarm also sounds. (p. 60)

Содержание IC-M94D

























































































Отзывы: