7
PANEL DESCRIPTION
2
2
■
Function display (Main screen)
D
Status area
The current status is displayed in the Status area�
Indicator
Description
SQL
Displayed when the Squelch function is ON�
NB
Displayed when the Noise Blanker function
is ON�
Displayed when the AGC function is OFF�
NR
Displayed when the Noise Reduction
function is ON�
• Displayed when the received audio is
recorded� (p� 17)
• Displayed when recording the received
audio is stopped� (p� 17)
SCRM
Displayed when the Voice Scrambler
function is ON�
Tune
Displayed when the Tune function is ON�
Scan
Displayed during a scan�
• Displayed when the volume is set to 1
to 20�
• Displayed when the volume is set to 0�
D
Task area
The current mode is displayed in the Task area�
Indicator
Description
STBY
Displayed while in the Standby mode�
RT
Displayed while in the Radio Telephone (RT)
mode�
L
Returns to the Standby mode if no operation
occurs during the preset of time�
DSC/
DSC (1)
Displayed after making or receiving a DSC
call�
L
If the transceiver is in the Multiple Task
mode, the number of the DSC task is
displayed by the indicator�
D
Information area
The 9 digit MMSI (Maritime Mobile Service Identity:
DSC self ID) code and the following indicators are
displayed in the information area�
Indicator
Description
Displayed when receiving a signal, or
when the squelch is open�
Displayed while transmitting�
Low/
Mid-L/
Mid-H
• Displayed when the TX power is set to
each level�
• If no indicator is displayed, the TX
po er is set to ig
• Displayed when the GPS receiver is
activated, and valid position data is
received�
• Blinks while invalid position data is
being received�
• Displayed when there is an unread DSC
message�
• Blinks when there is a new DSC message�
ispla e en t e C uto S itc in
DSC setting is set to an option except
“Accept after 10 sec�”
Displayed when the internal speaker is
OFF�
D
Channel area
The selected operating channel number, channel
name, and the following indicators are displayed in the
Channel area�
Indicator
Description
Displayed when the Channel Select mode
is selected�
Displayed when the Group Select mode is
selected�
Displayed when the Clarity function is
ON� The number displays the added or
subtracted frequency�
Displayed when the e-mail channel is
selected�
L
The Filter setting is also displayed�
Displayed when the Emergency FREQ
channel is selected�
• When receiving, the S meter displays
the relative signal strength�
• When transmitting, the RF meter
displays the output power level�
SIMP
Displayed when a Simplex channel is
selected�
DUP
Displayed when a Duplex channel is
selected�
USB/
AM/LSB/
AFSK/
FSK/CW
Displays the selected operating mode�
Information area
Task area
Status area
Position data
and Time area
Channel area
Software Key area
Содержание IC-M803
Страница 91: ...83 252 9 29 32 95 4 3 3 4 R8 5 16 Maximum 274 10 25 32 114 4 1 2 Unit mm inch Cut here...
Страница 92: ......
Страница 95: ...MEMO...
Страница 96: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan A7539H 1US 0a Printed in Japan 2019 Icom Inc Nov 2019...