9
2
3
3
PREPARATION
■
Entering the MMSI code
The Maritime Mobile Service Identity (MMSI: DSC self
ID) code consists of 9 digits� You can only enter the
co e en turning
t e transcei er or t e first time
This initial code can be entered only once.
After entering, it can be changed only by your dealer
or distributor�
If your MMSI code has already been entered, doing
the steps below is not necessary�
1� Hold down [ ] to turn ON the transceiver�
• Three short beeps sound, and then “Push [ENT] to
Register your MMSI” is displayed�
2� Push [ENT] to start entering the MMSI code�
• The “MMSI” screen is displayed�
L
To skip the entry, push [CLR] twice�
If you skip the entry, you cannot make a DSC call� To
enter the code after skipping, turn OFF the power, and
then turn it ON again�
3� Enter the MMSI code�
4� Repeat step 3 to enter all 9 digits�
5� Push the software key below
to set the
entered code�
• The “MMSI CONFIRMATION” screen is displayed�
6� Enter your MMSI code again to confirm�
7� Push
to set the confirmation code�
• When your MMSI code is successfully entered, “MMSI
Success ull Registere is rie ispla e an t en
the Main screen opens�
L
Your MMSI code is also displayed on the opening screen�
+
Push
Rotate
+
Push
Rotate
Содержание IC-M803
Страница 91: ...83 252 9 29 32 95 4 3 3 4 R8 5 16 Maximum 274 10 25 32 114 4 1 2 Unit mm inch Cut here...
Страница 92: ......
Страница 95: ...MEMO...
Страница 96: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan A7539H 1US 0a Printed in Japan 2019 Icom Inc Nov 2019...