Icom IC-M802, Инструкция по эксплуатации

Страница: 53 / 80

9
45
MEMORY OPERATION
2001 NEW
9
8
■
Memory description
The IC-M802 has several kinds of memories as fol-
lows:
• Address and group ID code memories (p. 46)
• Call, traffic and scan frequency memories. (p. 47)
• DSC transmission memory (described in this section)
• Received message memory (p. 40)
■
Memory writing
10 DSC transmission memory channels allow you to
set often used format specifiers and contents such as
for routine calls, group calls, etc.
q
During DSC watch mode, select the desired for-
mat category (except distress and test), and set
the message, traffic and call frequencies until the
call stand-by screen is displayed as described in
the CALL PROCEDURE section (pp. 21–37).
w
Hold down [ENT] for 1 second to select the TX
memory write mode.
e
Rotate [CH] to select the desired memory channel.
- - - T X m e m o r y w r i t e - - - -
0 :
1 :
2 :
3 :
4 :
5 :
Ç
W r i t e S E L
r
Hold down [ENT] for 1 second again to store the
condition into the selected memory channel.
• The set DSC format and calling station ID/name ap-
pear.
- - - T X m e m o r y w r i t e - - - -
0 : I n d i v i d u a l 9 8 7 6 5 4 3 2 1
1 :
2 :
3 :
4 :
5 :
Ç
O K S E L
t
Push [ENT] to return to the calling stand-by condi-
tion, or push [MODE
set
] to return to DSC watch
mode.
■
Memory reading/transmitting/deleting
q
Push [DSC] to select DSC watch mode, if neces-
sary.
w
Push [TX
txf
] to enter the DSC transmit memory
screen.
• Or, push [MODE
set
], rotate [CH] to select “
TX
memory
” then push [ENT], also selects the transmit
memory screen.
e
Rotate [CH] to select the selected memory chan-
nel to be read.
* * * * * * T X m e m o r y * * * * * * *
- - - - - - - - S e l e c t - - - - - - - -
0 : I n d i v i d u a l 9 8 7 6 5 4 3 2 1
1 :
2 :
3 :
4 :
5 :
Ç
O K S E L
r
Push [ENT] to display the memory contents.
* * * * * * T X m e m o r y * * * * * * *
- - - - - - I n d i v i d u a l - - - - - -
C a t e g o r y : D i s t r e s s
T o : 9 8 7 6 5 4 3 2 1
T r a f f i c : R a d i o t e l e p h o n e
T X 2 1 3 4 . 0 k H z
R X 2 1 3 4 . 0 k H z
C a l l F r e q : T X 2 1 8 7 . 5 k H z
R X 2 1 8 7 . 5 k H z
D E L C a l l
t
Operate as follows:
➥
When reading the memory contents only;
• Push [MODE
set
] to return to DSC watch
mode.
➥
When transmitting the memory contents;
• Hold down [CANCEL/CALL] for 1 second.
➥
When clearing the memory contents;
• Hold down [CE] for 1 second.