Icom IC-M801E, Инструкция по эксплуатации

Страница: 5 / 80

Quick Reference
II
QUICK REFERENCE
■
Audio output/squelch adjustment
D D
Audio output level
➥
Rotate [VOL] to adjust audio output level.
NOTE: Connect the handset/microphone and
make sure that no “ ” and “ SQL ” indicators are
displayed during audio level adjustment, otherwise,
audio may not be output.
When either or both indicators are displayed, per-
form the following operations;
- When “ ” is displayed, push [
F
] then [4
SP
×
].
- When “ SQL ” is displayed, push [
F
] then [2
SQL
].
[VOL]
[2
SQL
] [4
SP
× ]
[
F
]
S P
S P
D D
Squelch function
➥
Push [
F
] then [2
SQL
] to turn the squelch function
ON and OFF.
“ SQL ” appears when the squelch function is ON.
S Q L
0 1 2 3 4 A
C H - - - G P S - - -
L a t 4 5 5 9 ' N
L o n 1 3 4 4 4 ' E
1 6 : 2 3
J 3 E S I M P
[2
SQL
] [
F
]
• Squelch level adjustment
q
Push [
F
] then [2
SQL
] to turn the squelch function
ON.
• Select the desired frequency/channel in advance, if de-
sired.
w
Push [
F
] then [MODE
SET
] to enter quick set
mode.
e
Rotate [GRP] to select the “S-SQL LEVEL” item.
r
Rotate [CH] to adjust the squelch level.
• Adjust the level within 1–100 range.
t
Push [MODE
SET
] to exit quick set mode.
I T E M S E L
[MODE
SET
]
[2
SQL
]
[CH] [GRP]
[
F
]
• Voice squelch function
The voice squelch function detects voice components
in the received signal and opens the squelch only
when voice components are included in the signal.
q
While pushing [MODE
SET
] turn the power ON to
enter initial set mode.
w
Rotate [GRP] to select the “VOICE SQL” item.
e
Rotate [CH] to select the voice squelch function
ON and OFF.
r
Turn the power OFF then ON again to exit initial
set mode.
* * * S E T M O D E * * *
O F F
O N
ÇÇ
I T E M S E L
[MODE
SET
]
[POWER]
[GRP]
[CH]
IC-M801E_0.qxd 05.12.2 16:32 Page II