Icom IC-M801E, Инструкция по эксплуатации

Страница: 54 / 80

46
11
SET MODE
2001 NEW
D D
Initial set mode items (continued)
Modulation input/output selection
This item selects the input/output terminal for signals
to/from an external unit, such as a TNC (Terminal
Node Controller).
(default: AF/MOD )
* * * S E T M O D E * * *
A F / M O D
A C C
M I C
ÇÇ
I T E M S E L
ACC out
This item toggles signal output from [AF/MOD] (pins
6–8; KEY, 13.6 V and ALC signals) ON and OFF.
• OFF : No signal is output from pins 6–8 of
[AF/MOD]. (default)
• ON : KEY, 13.6 V and ALC signals are output
from pins 6–8, respectively.
* * * S E T M O D E * * *
O F F
O N
ÇÇ
I T E M S E L
Position indication type
Select the position indicating type from simple and de-
tail.
• SIMPLE : Hides second digits (default)
• DETAIL : Shows second digits
* * * S E T M O D E * * *
S I M P L E
D E T A I L
ÇÇ
I T E M S E L
Offset time
Set the offset time between the UTC and local time
within –12:00 to +12:00 in 10 minutes steps.
(default: 0:00)
* * * S E T M O D E * * *
I T E M S E L
Automatic print out
This item turns the automatic print out function ON
and OFF when receiving a DSC call.
• OFF : Prints out the received DSC contents
manually.
• ON : Prints out the received DSC contents
automatically. (default)
* * * S E T M O D E * * *
O F F
O N
ÇÇ
I T E M S E L
REMOTE connector interface
This item selects the interface format for [REMOTE]
connector. (default:
NMEA )
* * * S E T M O D E * * *
N M E A
R S - 2 3 2 C
ÇÇ
I T E M S E L
IC-M801E_0.qxd 05.12.2 16:32 Page 46