16
DSC OPERATION
6
■
MMSI code programming
The 9 digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can only be performed TWICE.
q
First, turn OFF the transceiver. Then, while holding down
[MENU]
, push
[POWER]
to turn ON the transceiver to
enter the MMSI code programming mode.
w
After the DSC menu screen is displayed, release
[MENU]
.
e
Enter “
MMSI check
” in the DSC Set up menu.
DSC Menu
➪
Set up
➪
MMSI Check
(Push
[MENU]
) (Rotate
[SELECTOR]
, then push
[ENT]
.)
r
Edit the specific MMSI code by pushing the keypad keys.
• Rotate
[SELECTOR]
to move the cursor backward or forward.
t
After carefully entering the 9 digit code, then push
[ENT]
to set the code.
• Returns to the DSC set up menu.
y
Push
[CLR]
or rotate
[SELECTOR]
to select “
Exit
,”
then push
[ENT]
to return to the DSC menu.
• Push
[ENT]
again to return to the normal operating mode.
■
DSC address ID
A total of 100 DSC address IDs can be entered, and a name
of up to 10 characters assigned to the ID.
D
Programming Individual ID
q
Enter “
Add:INDV ID
” in the DSC Set up menu.
DSC Menu
➪
Set up
➪
Add:INDV ID
(Push
[MENU]
) (Rotate
[SELECTOR]
, then push
[ENT]
.)
w
Set the individual ID and ID name by pushing the keypad
keys.
• Edit the 9 digits of the appropriate distress ID directly with the
keypad.
• Rotate
[SELECTOR]
to move the cursor backward or forward.
• Push
[CE]
to clear the ID and name.
• Push
[CLR]
to cancel and exit the screen.
e
Push
[ENT]
to set the ID and return to the DSC set up
menu.
r
Push
[CLR]
or rotate
[SELECTOR]
to select “
Exit
,”
then push
[ENT]
to return to the DSC menu.
• Push
[ENT]
again to return to the normal operating mode.
&5% /GPW
//5+%JGEM
AAAAAAAAA
%.4
'ZKV '061-
