11
3
BASIC OPERATION
3
■
Channel comments
Each channel can be labeled with a unique alphanumeric ID
of up to 10 characters.
Capital letters, small letters, 0 to 9, some symbols (
- . /
)
and space can be used.
q
Select the desired channel.
• Cancel Dualwatch, Tri-watch or Scan first.
w
While holding down
[H/L]
, push
[16•9]
to edit the channel
comment.
•
A cursor and the first character
start alternately blinking.
e
Push the appropriate key
several times to select the desired character.
• See the table to the right for selectable characters.
• Rotate
[SELECTOR]
or push
[
Y
]
/
[
Z
]
on the microphone to
move the cursor.
• Push
[CE]
to clear the channel comment.
• Push
[CLR]
to cancel and exit the screen.
r
Push
[ENT]
to input and set the comment.
• The cursor and the character stop blinking.
t
Repeat steps
q
to
r
to program other channel comments,
if desired.
• Selectable characters
KEY
CHARACTERS
KEY
CHARACTERS
(space)
■
AquaQuake water draining function
The IC-M604A uses a new technology to clear water away from
the speaker grill: AquaQuake. AquaQuake helps clear water
away from the speaker housing (water that might otherwise
muffle the sound coming from the speaker). The IC-M604A
emits a vibrating noise when this function is being used.
➥
While holding down
[H/L]
, turn ON the transceiver.
• A low beep tone sounds while
[H/L]
key is pushed and held to
drain water, regardless of
[VOL]
control setting.
• All other key operations are disabled while the AquaQuake
function is activated.
To clear water away from the HM-162, hold down
[PTT]
,
and then turn ON the transceiver.