Icom IC-M602 Скачать руководство пользователя страница 47

Страница: 47 / 78

OTHER FUNCTIONS

■

Hailer operation

The IC-M602 has a 2-way hailer function for voice amplifica-
tion and reception over a loudspeaker, making it unnecessary
to leave the bridge to hear a hailing party.

Connect an external hailer speaker as described on p. 49.

• Transmitting is not possible during hailer operation.
• The received signal is muted during hailer operation.

Push [

], then push [7

HAIL

] to enter hailer mode.

Push and hold [PTT] and speak at a normal voice level into
the microphone.

• “TALK” or “LISTEN” appears on the caller or listener function dis-

play, respectively.

• To adjust the hailer level , rotate [CHANNEL].

After releasing [PTT] you can hear the response through
the speaker.

To return to normal operation, push [CLR] or repeat step

• While in the hailer mode, the transceiver functions (trans-

mit and receive) are interrupted. If the transceiver is in
transmit condition, the hailer function is not available.

• When a DSC call is received, the hailer function is inter-

rupted with an automatic return to the transceiver mode.
The transceiver’s display indicates ‘Receiving DSC calls.’
(p 34)

BUSY-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

HAILER

-34"34.506N

LISTEN

.236W

___

cal--1:10--CALLING

Содержание IC-M602















































































Результаты поиска

Содержание IC-M602

Отзывы:

Icom IC-M602, Инструкция по эксплуатации, Страница: 47 / 78

Результаты поиска

Содержание IC-M602

Отзывы: