Icom IC-M602 Скачать руководство пользователя страница 46

Страница: 46 / 78

OTHER FUNCTIONS

■

Intercom operation

The optional intercom function allows you to talk to the deck
from the cabin. The optional HM-127

REMOTE-CONTROL MI-

CROPHONE

is required for intercom operation.

Connect an optional HM-127 as described on p. 62.

• Transmitting is impossible during intercom operation.
• The received signal is muted during intercom operation.

Push [

], then push [9

] to enter intercom mode.

• The HM-127 power is automatically turned ON, even if the power

is OFF.

Push and hold [9

] again to call up.

• The transceiver and microphone emit call beeps.

Push and hold [PTT] and speak at a normal voice level into
the microphone.

• “TALK” or “LISTEN” appears on the caller or listener function dis-

play, respectively.

• To adjust the IC-M602’s speaker output level, rotate [VOL].
• To adjust the HM-127’s speaker output level, push [

]/[

] after

pushing [VOL].

After releasing [PTT] you can hear the response through
the speaker.

To return to normal operation, push [CLR] or repeat step

• While in the intercom mode, the transceiver functions

(transmit and receive) are interrupted. If the transceiver is
in transmit condition, the intercom function is not avail-
able.

• When a DSC call is received, the intercom function is in-

terrupted with an automatic return to the transceiver
mode. The transceiver’s display indicates ‘Receiving DSC
calls.’ (p 34)

INT

BUSY-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

INTERCOM

-34"34.206N

TALK

123"23.236W

--UTC-10:10COMMERCIAL

IC-M602 (caller)

HM-127 (listener)

INT

BUSY-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

INTERCOM

-34"34.206N

123"23.236W

--UTC-10:10COMMERCIAL

IC-M602

HM-127

Содержание IC-M602















































































Результаты поиска

Содержание IC-M602

Отзывы:

Icom IC-M602, Инструкция по эксплуатации, Страница: 46 / 78

Результаты поиска

Содержание IC-M602

Отзывы: