Icom IC-i7410, Инструкция по эксплуатации

Страница: 60 / 124

5
53
FUNCTIONS FOR RECEIVE
■
RIT function
The RIT (Receive Increment Tuning) function com-
pensates for off-frequency operation of the received
station.
The function shifts the receive frequency up to
±9.99 kHz in 10 Hz steps*, without changing the trans-
mit frequency.
* The [RIT/ ∂ TX] control tunes in 1 Hz steps when the operat-
ing frequency readout is set to the 1 Hz step readout.
q
Push [RIT] to turn ON the RIT function.
• “RIT” and the frequency shift appear when this function
is ON.
w
Rotate the [RIT/ ∂ TX] control.
• Hold down [CLEAR] for 1 second to reset the RIT fre -
quency.
• Push [CLEAR] momentarily to reset the RIT frequency
when the “Quick RIT Clear” item is set to “ON” in the Set
mode. (p. 88)
• Hold down [RIT] for 1 second to add the frequency shift
to the operating frequency, if desired.
e
To cancel the RIT function, push [RIT] again.
• “RIT” and the frequency shift disappear.
D RIT Monitor function
When the RIT function is ON, holding down [XFC] al-
lows you to listen to the displayed frequency (RIT is
temporarily cancelled).
Appear
[RIT] [CLEAR]
[RIT/ ∂ TX]
A G C T B W S C P
M1
[XFC]