Icom IC-i7410, Инструкция по эксплуатации

Страница: 48 / 124

41
4
RECEIVE AND TRANSMIT
■
Electronic keyer functions (continued)
D Contest number Set mode
This mode is used to set the contest number and count
up trigger, etc.
• Setting contents
q
In the CW mode, push [MENU] to display the “M1”
screen (Menu 1).
w
Push [KEY](F-4) to display the “KEY” screen (Mem-
ory Keyer).
e
Push [001](F-4) to enter the Contest Number Set
mode.
r
Push [
Y
](F-1) or [
Z
](F-2) to select the desired
item.
t
Rotate [DIAL] to select the desired option.
• Hold down [F-3] for 1 second to reset to the default set -
ting, if desired.
y
Push [MENU] to save, and return to the “KEY”
screen.
u
Push [MENU] again to return to the “M1” screen.
Number Style 1.
(Default: Normal)
This item sets the numbering system used for contest
numbers— normal or short morse numbers.
Short morse numbers are also referred to as “cut”
numbers.
• Normal : Does not use short morse numbers
• 190
➔
ANO : Sets 1 as A, 9 as N and 0 as O.
• 190
➔
ANT : Sets 1 as A, 9 as N and 0 as T.
• 90
➔
NO : Sets 9 as N and 0 as O.
• 90
➔
NT : Sets 9 as N and 0 as T.
Count Up Trigger 2.
(Default: M2)
Set the count-up trigger to one of four memory slots
for the contest number exchange. The count-up trigger
allows the contest number to automatically advance
after each complete serial number exchange is sent.
• M1, M2, M3 or M4 can be set.
Present Number 3.
(Default: 001)
This item shows the current number for the count-up
trigger channel set above.
• Rotate [DIAL] to change the number, or hold down
[F-3](CLR) for 1 second to reset the current number
to 001.
∫
1
√
N o r m a l
001
Number Style
Select the item Reset to the default
setting