Icom IC-G80, Инструкция по эксплуатации

Страница: 44 / 48

39
TROUBLE SHOOTING
10
If your transceiver seems to be malfunctioning, please check the following points before sending it to a service center.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does not turn
ON. • The battery is exhausted.
• The battery polarity is reversed.
• Loose connection of a battery pack or case. • Charge the battery pack, or replace the batteries.
• Check the battery polarity.
• Clean the battery terminals. pp. 10–13
p. 13
p. 13
No sound comes from the
speaker. • Volume level is too low.
• An external speaker or a cloning cable is
connected to the [SP] jack.
• Rotate [VOL] to adjust the volume level.
• Check the external speaker connection or remove
the cloning cable.
p. 14
–
Transmitting is impossible. • The battery is exhausted.
• TX permission is inhibited on the channel.
• The Lockout function is activated. • Charge the battery pack, or replace the batteries.
• Ask your dealer to set the TX Inhibit function to OFF.
• Turn OFF the Lockout function. pp. 10–13
–
p. 21
Transmitting using the VOX
function is impossible. • The VOX gain is set to OFF or too low.
• The microphone gain is too low.
• TX permission is inhibited on the channel. • Set the VOX gain to a suitable level.
• Set the microphone gain to a suitable level.
• Ask your dealer to set the TX Inhibit function to OFF. p. 32
p. 33
–
Contacting with another sta-
tion is impossible. • A different tone or code is used for the
tone or DTCS squelch.
• Check the tone or DTCS by performing a tone
scan.
p. 24
Channel cannot be set. • The Key Lock function is activated.
• Push [FUNC]( M ), and then hold down [ ] for
1 second to turn OFF the Key Lock function.
p. 16
Some operations or modifica-
tions of Set mode items are
impossible. • The transceiver is in the simple mode. • Turn OFF the Simple Mode function. p. 37
The display is erroneous. • External factors have caused a fault. • Remove and re-attach the battery pack or case. p. 2