■
Optional battery case (BP-240)
When usng the optonal battery case attached to the trans-
cever, nstall 6
×
AAA (LR03) sze alkalne batteres as llus-
trated at rght.
q
Unhook the battery cover release hook (
q
), and open the
cover n the drecton of the arrow (
w
). (Fg.1)
w
Then, nstall 6
×
AAA (LR03) sze alkalne batteres.
(Fg.2)
• Install the alkalne batteres only.
• Be sure to observe the correct polarty.
• Do not pn the rbbon under the batteres.
e
Ft the cover n the drecton of the arrow (
e
), then close
(
r
). And hook the battery cover release hook untl t
makes a ‘clck’ sound (
t
).
(Fg.3)
CAUTION!
• When nstallng batteres, make sure they are all the
same brand, type and capacty. Also, do not mx new
and old batteres together.
• Keep battery contacts clean. It’s a good dea to clean
battery termnals once a week.
• Never ncnerate used battery cells snce nternal battery
gas may cause them to rupture.
• Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wpe t dry before usng t.
NOTE:
When the optonal battery case s attached, the
battery type must be selected to “DRY BATT” when turn-
ng the transcever ON. (p. 11)
q
BP-240
w
Fig.1
Fig.2
Fig.3
e
r
t
23
5
BATTERY CASE
