6
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
y
BELL INDICATOR
Appears/blnks when the matched sgnal s receved, ac-
cordng to the pre-programmng.
u
CALL CODE MEMORY INDICATOR
Appears when the call code memory s selected.
i
BATTERY INDICATOR
Appears or blnks when the battery power decreases to a
specfied level.
Indication
Full
Middle
Charging
required
No battery
Battery level
blinks when the battery is exhausted.
blinks when the battery is over charged.
o
ALPHANUMERIC DISPLAY
➥
Dsplays an operatng channel number, channel name,
Set mode contents, DTMF code, etc.
➥
The ndcaton mode can be selected from 1 lne or 2
lnes. Ask your dealer for detals.
• In ths nstructon manual, the LCD llustraton s descrbed
usng the 2 lnes ndcaton mode.
!0
KEY INDICATOR
Indcate the programmed functon of the front panel keys
([P0], [P1], [P2] and [P3]).
■
Programmable function keys
The followng functons can be assgned to
[EMR]
,
[Side1],
[Side2]
,
[Side3]
,
[P0]
,
[P1]
,
[P2]
and
[P3]
programmable
functon keys.
Consult your Icom dealer or system operator for detals con-
cernng your transcevers programmng.
If the programmable functon names are bracketed n the fol-
lowng explanatons, the specfic key s used to actvate the
functon depends on the programmng.
CH UP AND DOWN KEYS
“
UP
” “
DOWN
”
➥
Push to select an operatng channel. When [Rotary selec-
tor] selects “operatng channel,” ths key s not avalable.
➥
Push to select a transmt code channel after pushng
[TX Code CH Select].
➥
Push to select a DTMF channel after pushng [DTMF Au-
todal].
➥
Push to select a scan group after pushng and holdng
[Scan A Start/Stop]/[Scan B Start/Stop].
