36
7
DV MODE OPERATION (Optional UT-121 is required)
D
D
Station call sign programming
Station call sign must be programmed for the specified sta-
tion call as well as repeater operation in both digital voice and
low-speed data communications.
q
Select B band as the main band.
(p. 14)
w
Enter “UR” in call sign set mode.
• YOUR CALL SIGN screen is displayed.
e
Rotate
[DIAL]
†
to select the desired call sign memory,
“U01” to “U60.”
r
Push
[
≈
≈
](6)
to enter call sign programming mode.
• The 1st digit blinks.
t
Rotate
[DIAL]
†
to select the desired character or code.
• Push
[A/a](3)
to change the character group from “AB” (alpha-
betical characters; capital letters), “12” (numbers) and “/” (sym-
bols) in sequence.
y
Push
[
≈
≈
](6)
to select 2nd digit, then rotate
[DIAL]
†
to se-
lect the desired character or code.
• Push
[
≈
≈
](6)
to move the cursor right; push
[
Ω
Ω
](4)
to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
u
Repeat the steps
t
and
y
to enter the desired station call
sign.
• Up to an 8-digit of call sign can be set.
• If an un-necessary character is entered, push
[
≈
≈
](6)
or
[
Ω
Ω
](4)
to
select the character, then push
[CLR](1)
to erase the selected
character, or push and hold
[CLR](1)
for 1 sec. to erase all char-
acters following the cursor.
i
Push
[
ï
](5)
to store the programmed call sign and returns
to YOUR CALL SIGN screen.
o
Push
[MENU/LOCK]
to return to frequency indication.
U01
U01
STATION1
STATION1
:SET
:BACK
:SEL
:EDIT
CLR:CLR
YOUR CALL SIGN
r
U01
AB
S
†
:SET
:SET
:SEL
:SEL
:CUR
:CUR
CLR:CLR
CLR:CLR
A/a:CHAR
A/a:CHAR
0:CQ
0:CQ
YOUR CALL SIGN
YOUR CALL SIGN
r
U01
U01
AB
AB
†
:SET
:SET
:SEL
:SEL
:CUR
:CUR
CLR:CLR
CLR:CLR
A/a:CHAR
A/a:CHAR
0:CQ
0:CQ
YOUR CALL SIGN
YOUR CALL SIGN
r
U
CQCQCQ
CQCQCQ
:SET
:BACK
:SEL
:EDIT
CLR:CLR
YOUR CALL SIGN
r
MENU screen
➪
CALL SIGN
➪
UR
(Push
[MENU/LOCK]
) (Rotate
[DIAL]
†
, then push
[
ï
](5)
†
.)