18
4
FREQUENCY AND CHANNEL SETTING
■
Setting a tuning step
The tuning step can be selected for each frequency band.
The following tuning steps are available for the IC-E91.
• 5.0 kHz*
• 6.25 kHz* • 8.33 kHz
†
• 9.0 kHz
‡
• 10.0 kHz
• 12.5 kHz
• 15.0 kHz
• 20.0 kHz
• 25.0 kHz
• 30.0 kHz
• 50.0 kHz
• 100.0 kHz • 125.0 kHz • 200.0 kHz
* Appears for below the 600 MHz bands only.
†
Appears for the VHF air band only.
‡
Appears for the AM broadcast band only.
D
D
Tuning step selection
q
Push
[VFO]
to select VFO mode, if necessary.
w
Push
[BAND]
to select the desired frequency band.
• Or, while pushing and holding
[BAND]
, rotate
[DIAL]
to select
the desired frequency band.
e
Push and hold
[TS](8)
for 1 sec. to enter tuning step set mode.
r
Rotate
[DIAL]
to select the desired tuning step.
t
Push
[TS](8)
(or
[VFO]
) to return to VFO mode.
■
Setting a frequency
D
D
Using the dial
q
Push
[VFO]
to select VFO mode, if necessary.
w
Select the desired frequency band with
[BAND]
.
• Or, while pushing and holding
[BAND]
, rotate
[DIAL]
to select
the desired frequency band.
e
Rotate
[DIAL]
to select the desired frequency.
• The frequency changes according to the preset tuning steps.
See the left-hand side of the page to set the tuning step.
• Push and hold
[MHz](VFO)
for 1 sec. then rotate
[DIAL]
to
change the frequency in 1 MHz steps, or push and hold for 1 sec.
again then rotate
[DIAL]
to change the frequency in 10 MHz
steps. (Each pushing and holding for 1 sec. toggles 1 MHz or
10 MHz tuning steps. Push
[MHz](VFO)
to cancel it.)
A
PRIO
PRIO WX
WX EMR
EMR
DTCS
DTCS
FM
FM
145 000
+DUP
+DUP
25
A
PRIO
PRIO WX
WX EMR
EMR
DTCS
DTCS
FM
FM
145 000
+DUP
+DUP
25
[DIAL]
[DIAL] changes the fre-
quency according to the se-
lected tuning step.
After pushing and holding
[MHz](VFO) for 1 sec.,
[DIAL] changes the frequen-
cy in 1 MHz/10 MHz steps.
A
PRIO
PRIO WX
WX EMR
EMR
DTCS
DTCS
FM
FM
145 000
P
+DUP
+DUP
25
SET
-
TS:5.0kHz
µ
000
000
SKIP
[DIAL]
5 kHz tuning step