107
10
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N
Memory bank scan
IMPORTANT!:
To perform memory bank scan, 2 or more
bank channels MUST be programmed, otherwise the scan
will not start.
q
Select memory bank mode.
±
Select memory mode with
[M/CALL]
.
±
Enter the bank selection state with
[BAND]
.
±
Set the desired bank (A to Z) with
[DIAL]
, then push
[BAND]
.
w
Set the squelch level.
e
Push and hold
[SCAN]
(V/MHz) for 1 sec. to enter the scan-
ning type selection.
[DIAL]
All bank scan
Bank link scan
Bank scan
Push and hold
for 1 sec.
Duplex scan
Rotate
Selectable from “A” to “Z”
if programmed.
r
Rotate
[DIAL]
to select the desired scanning type.
• “ALL” for all bank scan; “B-LINK” for bank link scan or “BANK-
x
”
for bank scan (
x
= A to Z; programmed bank groups are only
displayed.), “DUP” (appears only when duplex operation is set)
for duplex scan.
t
Push
[V/MHz]
to start the scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction. This also
causes the transceiver to resume scanning.
• Push
[V/MHz]
to stop the scan.
• Push
[BAND]
to change the bank during bank scan.
During all bank/bank link scan
During bank scan
The bank-link setting can be changed in SCAN set mode.
See page 122 for details.
Duplex scan function:
Repeatedly scans two frequencies
(transmission/reception) during duplex scan operation.
Memory bank scan skips any memory channels in the se-
lected bank that are set to “SKIP” or “PSKIP.”
Memory bank scan stops at the first channel when all
channels in a bank are set to “SKIP” or “PSKIP.”
Содержание IC-E80D
Страница 184: ...176 MEMO...
Страница 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Страница 186: ...178 MEMO...
Страница 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...