manualshive.com logo in svg

Icom IC-E80D, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-E80D Скачать руководство пользователя страница 34

26

4

BASIC OPERATION

N

 Transmitting

CAUTION:  

Transmitting without an antenna will damage the 
transceiver.

NOTE: 

To prevent interference, push and hold 

[SQL]

 to 

listen on the channel before transmitting.

Tx/Rx

Microphone

indicator

q  

Set the operating frequency. 

(p. 23)

•  Transmission is available on the 144 

MHz/430 MHz amateur bands only.

•  Select output power if desired. See 

next page for details.

w

  Push and hold 

[PTT]

 to transmit.

• Tx/Rx indicator lights red.
•  S/RF meter shows the output power 

level.

e

  Speak into the microphone using 

your normal voice level.

•  DO NOT hold the transceiver too 

close to your mouth or speak 
too loudly. This may distort your 
speech.

r

 Release 

[PTT]

 to return to receive.

WARNING!
NEVER 

continuously transmit for long periods of time. 

When the transceiver is used for continuous prolonged 
transmission at high power, the transceiver radiates heat 
to protect itself from overheating and transceiver’s chassis 
will become hot. This may cause a burn.

DO NOT

 operate the transceiver in a situation that will 

obstruct heat dissipation, especially if the transceiver is 
operated with an external power supply. Heat dissipation 
may be affected, and it may cause a burn, warp the casing 
or damage the transceiver.

NOTE

: Transmit power set 2.5 W (MID) automatically when 

the transceiver radiates heat.

CONNECT

 the rated range voltage when using external 

power supply.

Содержание IC-E80D





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды