N
Memory scan
IMPORTANT!:
To perform memory scan, 2 or more mem-
ory channels MUST be programmed, otherwise the scan
will not start.
q
Push
[M/CALL]
several times to select memory mode.
w
Set the squelch level.
e
Push and hold
[SCAN]
(V/MHz) for 1 sec. to enter the scan-
ning type selection.
r
Rotate
[DIAL]
to select the desired scanning type.
• “ALL” for all memory scan; “BAND” for band memory scan,
“MODE” for mode scan, “DUP” (appears only when duplex op-
eration is set) for duplex scan.
[DIAL]
All memory scan
Band memory scan
Mode scan
Push and hold
for 1 sec.
Duplex scan
Rotate
Selected mode is displayed.
t
Push
[V/MHz]
to start the scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction. This also
causes the transceiver to resume scanning.
• Push
[V/MHz]
to stop the scan.
During memory scan
During mode scan
Band memory scan function:
Repeatedly scans all
memory channels programmed with any frequencies of
the band programmed in the memory channel selected for
scanning.
Mode scan function:
Repeatedly scans all memory chan-
nels in which the same operating mode as the selected
memory channel has been programmed.
Duplex scan function:
Repeatedly scans two frequencies
(transmission/reception) during duplex scan operation.
106
10
SCAN OPERATION
Содержание IC-E80D
Страница 184: ...176 MEMO...
Страница 185: ...177 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Страница 186: ...178 MEMO...
Страница 187: ...179 MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
