33
6
MEMORY/CALL CHANNELS
■
Call channel programming
q
Push
[V/M] (
SKIP
•
S
.
MW
)
to select
VFO mode
, if necessary.
w
Set the desired frequency:
➥
Select the desired band with
[BAND] (
TS
•
LOCK
)
.
➥
Set the desired frequency with
[DIAL]
.
➥
Set other data
(e.g. offset frequency, duplex direction, sub-
audible tone frequency, etc.)
, if desired.
e
Push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 1 sec. to enter
select
memory write mode
.
• 1 short and 1 long beep sound.
• “
” indicator and memory channel number blink.
r
Rotate
[DIAL]
to select the desired call channel.
• “
” indicator and call channel number “C0” or “C1” blink.
• While pushing and holding
[FUNC]
, rotate
[DIAL]
to select mem-
ory channel in 10 channel steps.
t
Push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 1 sec.
• 3 beeps sound
■
Copying call channel contents
q
Push
[CALL] (
MODE
•
SCAN
)
momentarily to select a call
channel.
w
Rotate
[DIAL]
to select the desired call channel.
e
Push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 1 sec. to enter
select
memory write mode
.
• 1 short and 1 long beeps sound.
• “
” indicator and memory channel number blink.
• Do not hold
[V/M] (
SKIP
•
S
.
MW
)
for more than 2 sec. otherwise the
call channel contents will be copied to VFO.
r
Rotate
[DIAL]
to select the desired target memory chan-
nel.
t
Push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 1 sec. to transfer the
contents.
CONVENIENT!:
When you want to copy the call channel contents to the VFO,
push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 2 sec. as in steps
e
.
SCAN
S.MW
SET
SCAN
[DIAL]
S.MW
SCAN
S.MW
SET
[DIAL]
S.MW
