2
1
PANEL DESCRIPTION
1
y
SQUELCH CONTROL [SQL]
Varies the squelch level. (p. 15)
• The RF attenuator activates and increases the attenuation when
rotated clockwise to the center position and further. (p. 16)
u
MONITOR•DTMF SWITCH [MONI•DTMF]
➥
Push to switch the monitor function ON and OFF. (p. 15)
➥
Turns DTMF memory encoder ON and OFF when
pushed for 1 sec. (p. 47)
i
OUTPUT POWER•DUPLEX SWITCH [LOW•DUP]
➥
Each push changes the output power selection. (p. 17)
➥
Push for 1 sec. to select DUP–, DUP+ and simplex op-
eration. (p. 20)
o
TONE•TONE SCAN SWITCH [TONE•T-SCAN]
➥
Each push selects a tone function. (pgs. 20, 51)
• Subaudible tone encoder, pocket beep (CTCSS), tone
squelch, pocket beep (DTCS), DTCS squelch or tone func-
tion OFF can be selected.
➥
Push for 1 sec. to start the tone scan. (p. 54)
!0
MEMORY/CALL•PRIORITY SWITCH [M/CALL•PRIO]
➥
Push to select and toggle memory and call channel
modes. (pgs. 11, 25, 37)
➥
Starts priority watch when pushed for 1 sec. (p. 46)
!1
VFO/MHz TUNING•SCAN SWITCH [V/MHz•SCAN]
➥
Selects and toggles VFO mode and 1 MHz (or 10 MHz
for some versions) tuning when pushed. (p. 11)
➥
Starts scan when pushed for 1 sec. (p. 40)
• Cancels a scan when pushed during scan.
!2
BAND SWITCH [BAND]
➥
Push to select the operating frequency band. (p. 11)
➥
Push to select the call channel 1 or 2 during call channel
operation. (p. 37)
➥
Push for 1 sec. to select the operating mode. (p. 63)
!3
MEMORY WRITE SWITCH [S.MW•MW]
(pgs. 26, 38, 41)
➥
Selects a memory channel for programming when
pushed.
➥
Programs the selected memory channel when pushed
for 1 sec.
!4
CONTROLLER RELEASE LATCH
While pushing this latch, slide the controller to the left to
remove it.
!4