Icom IC-905, Руководство для продвинутых пользователей

Страница: 164 / 215

11
D-STAR OPERATION (ADVANCED)
11-32
Entering new information into the repeater list
D
Skip setting for the DR scan
You can set repeaters as scan skip repeaters The selected repeaters are skipped for faster scanning
You can set the skip setting to all repeaters in the selected repeater group, or to individual repeaters
L
When a repeater is set as a skip repeater, its “USE (FROM)” setting is automatically set to “NO” In that case, the repeater
cannot be selected in “FROM” (Access repeater) on the DR screen
Individual skip setting
1 Open the REPEATER GROUP screen
»
2
> DV/DD MEMORY > Repeater List
2 Touch a repeater group where the repeater you
set the skip setting is listed
(Example: 12: Japan)
3 Touch a repeater that you want to skip for 1
second (Example: Hirano)
4 Touch “SKIP”
• Displays “SKIP” in the upper right corner
L
To cancel the skip setting, touch “SKIP” again
L
To set the skip setting to all repeaters in the group,
touch “SKIP All ON”
5 To close the Repeater List screen, push
several times
Group skip setting
On the REPEATER GROUP screen, push ,
then touch “SKIP All ON” to skip the repeaters in the
group during the DR scan
L
To cancel the skip settings in the group, touch “SKIP All
OFF”
TIP:
• When you select “Repeater List” on the FROM SELECT
screen, you can set the skip setting as described to the
left
• When “FROM” is selected on the DR screen, push
, then touch “SKIP” to set the skip setting, as
shown below