9
GPS OPERATION (ADVANCED)
9-26
GPS Alarm
D
Setting the GPS Alarm function to RX (a caller station)
1�
Open the GPS ALARM screen.
» GPS >
GPS Alarm
2�
Touch “Alarm Select.”
3�
Touch “RX.”
L
If you want to set the alarm to a specific GPS
Memory, touch “Memory” and then select a GPS
Memory in a GPS Memory group.
4�
To close the GPS ALARM screen, push
several times.
L
Information
•
When a station with its GPS Alarm set enters within an
approximate 1 kilometer (1094 yards) range, the alarm
sounds once. When it enters within an approximate 500
meters (547 yards) range, the alarm sounds 3 times.
•
When the transceiver sounds a GPS Alarm, “GPS
ALARM” pops up on the screen, and “ ” blinks. See the
illustration below.
•
To cancel the GPS Alarm function, touch “OFF” in step 3
to the left.
“GPS ALARM” pops up on the screen
and the alarm sounds 3 times.
Blinks
NOTE:
Even if “RX” is selected in step 3, when the
received signal has no position data, the GPS Alarm
does not sound.
TIP:
When selecting “RX” or a specific GPS Memory
in step 3 to the left, you also have to set “Alarm Area
(RX/Memory)” to use the GPS Alarm function.
»
GPS > GPS Alarm >
Alarm Area (RX/Memory)
Содержание IC-905
Страница 204: ...14 1 Section 14 Cloning 14 2 Touch Screen Calibration function 14 4 MAINTENANCE ADVANCED ...
Страница 213: ...16 1 Section 16 FSK and AFSK connections 16 2 ADVANCED CONNECTIONS ...
Страница 215: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan A7711 8EX 2023 Icom Inc Mar 2023 How the World Communicates ...