Icom IC-7300 Скачать руководство пользователя страница 150

Страница: 150 / 174

17-3

OPTIONS

Mounting the MB-118

Adjust for the best

viewing angle.

Screw

MB-118

Drill 4 holes of 3 mm (0.12 in) to attach the bracket.

Drill 5.5 mm~5.6 mm (0.21 in~0.22 in) holes when using

the supplied hex screws.

Flat washer

Spring washer

Bolt

Mount the MB-118

mounting

bracket

to a place

where it can be firmly attached.

We recommend that you periodically check

whether the screws are loose or not, especially

after a long period of use.

NOTE:

• Before mounting the MB-118, carefully read

PRECAUTIONS (p. vi) and decide the mounting place.

• DO NOT use bolts other than the ones that are supplied

with the MB-118. Other bolts (longer than 8 mm/0.31 in)

may damage the internal units.

Attaching the MB-123

NOTE: DO NOT

use other than the screws supplied with

the MB-123.

Rubber

feet

Push-in the

center part

Rubber

feet

Carrying handle

The optional MB-123

carrying

handle

with the

rubber feet is convenient for carrying the transceiver.

1. Attach the rubber feet supplied with the MB-123 to

the transceiver.

To firmly attach, push-in the center part of the rubber

feet.

2. Attach the carrying handle using the supplied

screws as shown to the right.

Previous view

Содержание IC-7300















































































































































































Результаты поиска

Содержание IC-7300

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-7300, Полное руководство

Результаты поиска

Содержание IC-7300

Отзывы:

Бренды по названию

Популярные бренды