Icom IC-7300 Скачать руководство пользователя страница 143

Страница: 143 / 174

15-5

UPDATING THE FIRMWARE

Updating the firmware

IMPORTANT:

To update the firmware, first format

your SD card using the IC-7300. (p. 8-3) Then copy

the downloaded firmware data from your PC to the

SD card. (p. 8-4)

CAUTION: NEVER

turn OFF the transceiver while

updating the firmware.

If you turn OFF the transceiver, or if a power failure

occurs while updating, the transceiver firmware will be

damaged and you will have to send the transceiver

back to the nearest Icom distributor for repair.

This type of repair is out of warranty, even if the

transceiver warranty period is still valid.

TIP: BE SURE

to unzip the downloaded file. See

“Unzipping the firmware file (p. 15-4)” for details.

Copy the downloaded firmware data into the

IC-7300 folder on an SD card or a USB flash drive.

Insert the SD card into the transceiver's

[SD CARD] slot.

On the Set mode menu screen, display the

SD CARD screen.

MENU

SET >

SD card

Select “Firmware Update.”

•

The firmware update agreement screen is displayed.

Touch [

] or [

] to scroll the screen.

Carefully read all the displayed precautions.

After you read and agree with all the precautions,

touch [YES].

•

The file select screen is displayed.

When you want to cancel the updating, touch [NO].

7. Touch the Firmware (Example: 7300_101).

•

The final confirmation screen is displayed.

Carefully read all the displayed precautions.

8. After you read and agree with all the precautions,

touch [YES] for 1 second.

•

The updating starts.

If you want to cancel the updating, touch [NO].

Rotate

Push

Copy

The Firmware Update Agreement screen

Previous view

Содержание IC-7300















































































































































































Результаты поиска

Содержание IC-7300

Отзывы:

Похожие инструкции для IC-7300

Бренды по названию

Популярные бренды

Icom IC-7300, Полное руководство

Результаты поиска

Содержание IC-7300

Отзывы:

Похожие инструкции для IC-7300

Бренды по названию

Популярные бренды