4
RECEIVING AND TRANSMITTING
4-12
D
Settingthekeyspeed
You can set the key speed of the internal electric
keyer.
1. Select the CW mode.
2. Display the Multi-function menu.
3. Touch [KEY SPEED].
Operating CW (Continued)
4. Set the key speed to between 6 and 48 Words Per
Minute (WPM).
Rotate
Push
Push
D
AbouttheBreak-infunction
UsetheBreak-infunctionintheCWmodeto
automatically switch between transmit and receive
whenkeying.TheIC-7300iscapableofSemiBreak-in
and Full break-in modes.
SemiBreak-in
SemiBreak-inoperation
IntheSemiBreak-inmode,thetransceivertransmits
when keying, and then automatically returns to receive
after a preset time after you stop keying.
1. Select the CW mode.
2. Push
VOX/BK-IN
todisplay“BKIN.”
L
Pushing
VOX/BK-IN
selects“BKIN(SemiBreak-in),”
“F-BKIN(FullBreak-in)”orOFF(noindication).
Rotate
3. ToadjusttheBreak-indelaytime,holddown
VOX/BK-IN
for 1 second.
•OpenstheBKINmenu.
4. Set to where the transceiver does not return to
receive while keying.
L
When you are using a paddle, push
MULTI
to display
the Multi-function menu, and then adjust the KEY
SPEED while operating the paddle.
TIP
: The key type is set to “Paddle” by default. You can
select the keyer type on the CW-KEY SET screen.
(p. 4-14)
5. ToclosetheBKINmenu,push
EXIT
.
Содержание IC-7300
Страница 1: ...BASIC MANUAL i7300 HF 50 MHz TRANSCEIVER...