manualshive.com logo in svg

Icom IC-7300, Основное руководство

Поделиться
Скачать
Icom IC-7300 Скачать руководство пользователя страница 18

2

INSTALLATION AND CONNECTIONS

2-2

Rear panel connection

[DC 13.8 V] DC power supply

(p. 12-3)

Use the optional  

PS-126 or a power 

supply with 13.8 V DC 

output and a current 

capacity of at least 

21 A. 

[KEY] (CW key) jack 

(p. 12-3)

(6.35 mm: 1/4 in (d))

You can use a straight or bug key when 

the internal electronic keyer is OFF. 

[GND] (Ground)

Grounding prevents 

electrical shock, TVI 

and other problems.

[ANT] (antenna) connector

Connect a 50 Ω antenna for the HF, 50/70 MHz 

frequency bands.

[REMOTE] jack 

(p. 12-3)

(3.5 mm: 1/8 in (d))

Remotely controls the 

transceiver, using the 

optional RS-BA1, or 

CI-V commands.

[TUNER] control socket

 (p. 2-3)

Connect the control cable 

from an optional AH-4 or 

AH-740 (Automatic antenna 

tuner).

The AH-2b is connected to 

the AH-4.

AH-4

(Option)

AH-2b  

(Option)

[EXT-SP]

  

(External speaker) jack

 (p. 12-3) (3.5 mm: 1/8 in (d))

SP-34

(Option)

Impedance: 4~8 Ω

Audio level: More than  

2.5 W at 10% distortion 

into an 8 Ω load

[ALC]/[SEND] jack

Connect with an RCA plug
[ALC] jack connects to the ALC 

output jack of a non-Icom linear 

amplifier.

[SEND] jack is used to control 

an external non-Icom linear 

amplifier.

 [USB] port

 • Remotely controls the transceiver using 

CI-V commands.

 • Sends the received audio to the PC

 •Inputs modulation

 • Sends the decoded RTTY outputs to the PC.

•  Remote control operation using the optional 

RS-BA1.

( Icom does not guarantee the performance of the 

PC, network device or network settings)

[ACC] (accessory) socket

 (p. 12-1)

Connects control lines for external devices 

such as a TNC or a PC.

Refer to the external device’s instruction 

manual for connection.

Paddle

Straight key

PS-126 (option)

AH-740  

(Option)

Содержание IC-7300









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды