Icom IC-440 Скачать руководство пользователя страница 36

Страница: 36 / 64

SELCALL OPERATION

■

When receiving a call

Receiving an individual call

When receiving a RX code (default setting);

• “PiRo” beeps sound.

•

The received code channel name is displayed, if programmed.

•

“

” and the displayed channel name* blink, and the SelCall

mute is released when the quiet mode is activated.

* “

” and the channel number blink when the channel name is

not programmed.

While pushing and holding

[PTT]

, speak into the micro-

phone at a normal voice level.

NOTE:

When the ID decode function is turned ON, the re-

ceived ID code is displayed instead of the channel name, and
memorised into the transceiver. The ID decode function can
be turned ON using the optional CS-440

CLONING

SOFTWARE

•

RX code

means the Receiving SelCall code. Max. 8 in-

dividual call channels can be pre-programmed into the
transceiver using the CS-440.

• You can set the transceiver’s condition when receiving

an individual call using the CS-440. See the help fi le for
setting details.

Recall the memorised received ID code:

Push

SET

(Function)

to enter the function mode, then push

and hold

࡮

(ID-MR)

for 2 sec. to display the memorised

received ID code.

Push

to select the desired received ID code.

Push

[PTT]

to transmit the code on the selected channel.

Receiving a group call

When receiving a group call (default setting);

• “PiPi” beep sounds.

•

“

” and “

GROUP

” blink, and the SelCall mute is released when

the quiet mode is activated.

While pushing and holding

[PTT]

, speak into the micro-

phone at a normal voice level if necessary.

You can set the transceiver’s condition when receiving a

group call with the CS-440. See the help file for setting
details.

Blink

IC-440-1.indd 32

2008/06/25 15:59:40

Содержание IC-440

































































Результаты поиска

Содержание IC-440

Отзывы:

Похожие инструкции для IC-440

Бренды по названию

Популярные бренды

Icom IC-440, Инструкция по эксплуатации

Результаты поиска

Содержание IC-440

Отзывы:

Похожие инструкции для IC-440

Бренды по названию

Популярные бренды