![background image](http://html.mh-extra.com/html/icom/ic-440/ic-440_instruction-manual_612149044.webp)
40
9
SET MODE
■
Set mode
Set mode allows you to change seldom used common set-
ting for the transceiver, or individual setting for the operating
channel. In this case you can “customize” transceiver opera-
tion to suit your preferences and operating style.
Available functions may differ depending on the pre-setting
via the optional CS-440
CLONING
SOFTWARE
.
NOTE:
Set mode can be accessed via the
F
SET
(Set Mode)
key operation after turning power ON with
and
(p. 19). In this case, “all set mode” is available.
D
Set mode operation
q
Push and hold
F
SET
(Set Mode)
for 2 sec. to enter Set mode.
•
When no key is pushed for 30 sec. the transceiver returns to
normal operation.
w
Push
F
SET
* or
MONI
T SQL
* to select the desired item, if necessary.
e
Push
or
to select the desired condition of the
item.
r
Push and hold
for 2 sec. to turn the power OFF, or
push and hold
F
SET
(Set Mode)
for 2 sec. to exit set mode.
*Regardless of the assigned key function.
D
Set mode construction
: Push
: Push
Starting item
• CTCSS/DTCS
• Auto Power OFF
• Backlight
• Brightness
• Contrast
• Beep
• Squelch Level
• Own ID
• Lock-out
• Time-Out Timer
(TOT)
• Signal Message
• Speaker
• Mic Gain
• Beep level
• Roger Beep
• Scan Restart
• PTT Hold
• Scan Stop Timer
F
SET
MONI
T SQL
IC-440-1.indd 40
IC-440-1.indd 40
2008/06/25 15:59:43
2008/06/25 15:59:43