manualshive.com logo in svg

Icom IC-4088S, Инструкция по эксплуатации, Страница: 31 / 32

Поделиться
Скачать
Icom IC-4088S Скачать руководство пользователя страница 31

27

13

WARRANTY

13

WARRANTY SERVICE INSTRUCTIONS

1. If you have difficulty, send your equipment to Icom (Australia) Pty.

Ltd., preferably in the original carton, without accessories, prepaid,
with a brief explanation of the difficulty you have experienced.

2. Include accessories only if your specific situation indicates an acces-

sory related difficulty exists, otherwise Icom (Australia) Pty. Ltd. shall
assume no liability for the loss or safe return of an accessory item.
Itemise these accessories on the note of explanation.

3. If the requested repairs or services are within the terms of the war-

ranty, your equipment will be returned after repair, prepaid, to any
designated point within Australia.

4. If the requested repairs or services are not within the terms of the

warranty if you fail to provide acceptable evidence of the date of pur-
chase, return freight will be charged.

Model

:

i4088S

Date of purchase :

Serial Number

:

Dealer Name

:

Authorized Icom Distributor

Icom (Australia) Pty. Ltd. A.B.N. 88 006 092 575

290–294 Albert Street,

Brunswick 3056 Vic.

IC-4088S.qxd  03.10.2 8:21  Page 27 (1,1)

Содержание IC-4088S

































Отзывы:

Нет отзывов