manualshive.com logo in svg

Icom IC-4088S, Инструкция по эксплуатации, Страница: 25 / 32

Поделиться
Скачать
Icom IC-4088S Скачать руководство пользователя страница 25

21

10

OTHER FUNCTIONS

10

■

ATS 

(Automatic Transponder System)

This allows the user to confirm whether or not a call has reached
the receiving party even if the operator is temporarily away from the
transceiver. No “Ring” tone is emitted with this function.

➥

While pushing [PTT], push
[MODE] to turn the function ON
and OFF. 
• “

” appears on the display. 

• The transceiver starts to send a

searching signal every 60 sec.
- When the transceiver receives

an answer back signal, “

”

stays on the display until the
next search transmit.

- If no reply is received, “

” blinks until the next search transmit.

NOTE:

Above setting is for the calling station only. A called party

automatically sends an answer back signal without any preset-
tings. All IC-4088S’s operating on the same operating channel
will answer back to the call in the surroundings communications
area. 

‘

‘

Resetting the transceiver

Initialize the operating conditions
before using the transceiver for the
first time, or if the function display
shows erroneous information.

➥ 

While pushing [

Z

] and [MODE],

push [PWR] for 1 sec. to initial-
ize the transceiver.

CAUTION: 

Resetting the trans-

ceiver returns all settings to
their defaults.

[PTT]

[MODE]

[MODE]

[PWR]

[

Z

]

IC-4088S.qxd  03.10.2 8:21  Page 21 (1,1)

Содержание IC-4088S

































Отзывы:

Нет отзывов