manualshive.com logo in svg

Icom IC-4088S, Инструкция по эксплуатации, Страница: 30 / 32

Поделиться
Скачать
Icom IC-4088S Скачать руководство пользователя страница 30

26

13

WARRANTY

Icom Limited Warranty

Icom Incorporated is proud of the technology within, and the quality of
workmanship of its products.

Icom (Australia) Pty. Ltd.

, the authorised Icom Distributor, warrants

this Icom product to be free from defects in material or workmanship for
the applicable period indicated below:

Radios: Two (2) years from the date of purchase, (excluding acces-

sories), from an Australian authorised Icom Dealers.

Accessories (i.e. battery, antenna, battery chargers, etc.):

Six (6) months from the date of purchase, from an Australian
authorised Icom Dealer. 

Icom (Australia) Pty. Ltd.

will, at its discretion, and subject to the terms

and conditions stated below, repair or replace any goods or component
part thereof which its examination shall disclose to be defective. Unless
otherwise expressly provided, any fault arising from defective work-
manship or material shall be rectified by Icom where the equipment is
returned freight prepaid to Icom at 290–294 Albert Street, Brunswick,
Victoria 3056.

This warranty shall not apply:

(a) To an Icom Product which has failed due to improper installation,

misuse, accident, alteration or unauthorised repair or modifica-
tion.

(b) If any serial number or identification plate attached to the goods

has been altered, rendered illegible, or removed.

(c) If the goods have been damaged by corrosion, deterioration or

the like contributed to abnormal temperatures; the influence of
foreign matter or energy or physical or chemical properties of
water, steam or chemical compounds.

The benefits conferred by this warranty are in addition to all implied war-
ranties, other rights and remedies in respect of the product which the
consumer has under the Trade Practices Act and similar State and Ter-
ritory Laws. 

IC-4088S.qxd  03.10.2 8:21  Page 26 (1,1)

Содержание IC-4088S

































Отзывы:

Нет отзывов