Icom F3161 Series, Руководство по программированию

Страница: 7 / 27

5
Programming Digital Features
Programming for a Select Call using Individual IDs
Individual IDs allow you to call a particular radio, excluding any others that are on the same frequency. Program your
radio with the following settings. All frequencies need to be entered and the squelch level must be set before
performing this procedure.
Memory CH Window / Zone Operation Window
Field Setting/Description
Zone Operation
»
Zone Type
Set to Conventional (the field will show blank).
Memory CH Window / Zone Window
Field Setting/Description
CH Type Set to Digital .
Digital
»
Unit ID
Set to this radio’s ID for the applicable channels. Points to the
ID setting in the Individual ID List window.
Digital
»
Squelch Type
Set to SEL if you want the squelch to open with the proper
RAN and Talk Group or Individual ID.
Individual ID List Window
Field Setting/Description
ID
Enter all Individual IDs. This is a look-up (alias) table for every
Individual ID in the system. Refers to the Unit IDs set in the
Memory CH.
ID Name Enter an Individual ID. This ID will display on the RX radio
during a selective call.
Individual Setting Window
Field Setting/Description
Log for Individual Call Set to Enable .
Option Window
Field Setting/Description
Unit ID Display on Receive Set to ON if you want the target radio to show the Individual ID
of the transmitting radio.
Reset Timer(Sec)
Enter a time value in seconds. For the duration of this timer,
the radio will stay in selective call mode. If this is set to
OFF ,
the last selected Individual or Talk Group will remain as the
default call when pressing PTT.
Common Window
Field Setting/Description
Key & Display
»
Key
Set one of the programmable keys to Digital Button .
To Make an Individual Select Call
1. Press and hold the key assigned for Digital calls. The display will briefly show INDIVIDUAL or TALKGROUP.
If the selection is TALKGROUP, press and hold the key again, then press and hold to select INDIVIDUAL.
2. Press the Digital key quickly to bring up the list of Individual IDs.
3. Scroll to the desired radio ID by pressing the Up/Down keys, then press PTT.