12
Programming for Stun
Targeted radios can be rendered inoperable remotely. A stunned radio can also be revived remotely. This feature is
active for Individual radios, not for Talk Groups. Program your radio with the following settings. All frequencies need
to be entered and the squelch level must be set before performing this procedure.
Memory CH Window / Zone Operation Window
Field
Setting/Description
Zone Operation
»
Zone Type
Set to
Conventional
(the field will show blank).
Memory CH Window / Zone Window
Field
Setting/Description
CH Type
Set to
Digital
Digital
»
Unit ID
Set to this radio’s ID for the applicable channels. Points to
the ID setting in the Individual ID List window.
Digital
»
Squelch Type
Set to
SEL
if you want to squelch to open with the proper
RAN and Talk Group or Individual ID.
Stun Window
Field
Setting/Description
RX
Set to
Enable
to allow your radio to be stunned.
TX
Set to
Enable
to be able stun a target radio.
Mode
This setting allows you to specify whether you want a
stunned radio to be inhibited from transmitting only, or both
transmitting
and
receiving.
Common Window
Field
Setting/Description
Key & Display
»
Key
Set one of the programmable keys to
Digital Button
.
To Send a Stun Signal
1.
Press
and hold
the key assigned for Digital calls. The display will briefly show INDIVIDUAL or TALKGROUP.
If the selection is TALKGROUP, press and hold the key again, then press and hold to select INDIVIDUAL.
2.
Press the up/down keys to select STUN.
3.
Press the Digital key
quickly
to bring up the list of IDs.
4.
Scroll to the desired radio ID by pressing the Up/Down keys.
5.
Press PTT. If successful, your display will show STN TX, then STN ACK. If it failed, your display will show
STN FAIL.
Содержание F3161 Series
Страница 1: ...f3161 f5061 series enhanced features idas programming guide Includes Trunking...
Страница 5: ...3...
