14
Programming for Kill
Targeted radios can be rendered inoperable remotely. This feature is active for Individual radios, not for Talk Groups.
Program your radio with the following settings. All frequencies need to be entered and the squelch level must be set
before performing this procedure.
Important:
A radio that has received a Kill signal
can only
be made operable again by having a new cloning file
programmed into the radio. There is no way that a radio can restore the operation of a radio that has received a Kill
signal.
Memory CH Window / Zone Operation Window
Field
Setting/Description
Zone Operation
»
Zone Type
Set to
Conventional
(the field will show blank).
Memory CH Window / Zone Window
Field
Setting/Description
CH Type
Set to
Digital
Digital
»
Unit ID
Set to this radio’s ID for the applicable channels. Points to
the ID setting in the Individual ID List window.
Digital
»
Squelch Type
Set to
SEL
if you want to squelch to open with the proper
RAN and Individual ID.
Kill Window
Field
Setting/Description
RX
Set to
Enable
to allow your radio to be killed.
TX
Set to
Enable
to be able kill a target radio.
Common Window
Field
Setting/Description
Key & Display
»
Key
Set one of the programmable keys to
Digital Button
.
To Send a Kill Signal
1.
Press
and hold
the key assigned for Digital calls. The display will briefly show INDIVIDUAL or TALKGROUP.
If the selection is TALKGROUP, press and hold the key again, then press and hold to select INDIVIDUAL.
2.
Press the up/down keys to select KILL.
3.
Press the Digital key
quickly
to bring up the list of IDs.
4.
Scroll to the desired radio ID by pressing the Up/Down keys.
5.
Press PTT. If successful, your display will show KIL TX, then KIL ACK. If it failed, your display will show KIL
FAIL.
Содержание F3161 Series
Страница 1: ...f3161 f5061 series enhanced features idas programming guide Includes Trunking...
Страница 5: ...3...
