19
D-STAR OPERATION
New2001
New2001
D-STAR GUIDE
■
Making a Gateway Repeater call
Step 1: Set “FROM” (Access repeater)
1. Hold down [DR] for 1 second to display the DR screen.
2. Select “FROM,” then push [
ï
].
•Displays the FROM SELECT screen.
L
On the DR screen, pushing [DR] toggles between “FROM”
and “TO.”
3. Rotate [DIAL] to select “Repeater List,” then push [
ï
].
•Displays the REPEATER GROUP screen.
4. Select the repeater group where your access repeater
is listed, then push [
ï
].
5. Select your access repeater, then push [
ï
].
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”
(Example: Your access repeater is set to “Hirano.”)
What is a Gateway Repeater Call?
To call through your local area (access) repeater, repeater
gateway, and the Internet to your desired destination
repeater.
Step 2: Set “TO” (Destination)
1. Push [DR] to select “TO,” then push [
ï
].
•Displays the TO SELECT screen.
2. Rotate [DIAL] to select “Gateway CQ,” then push [
ï
].
•Displays the REPEATER GROUP screen.
L
If the selected Access repeater does not connect to the
gateway,
is displayed. In that case, you cannot
select “Gateway CQ.”
3. Select the repeater group where your destination
repeater is listed, then push [
ï
].
4. Select your destination repeater, then push [
ï
].
• Returns to the DR screen, and the selected repeater name is
displayed in “TO.”
(Example: The destination repeater is set to
“Hamacho.”)
Step 3: Hold down [PTT] to transmit
•Displays
while transmitting.
A Gateway call can be made when a destination repeater is
selected in “TO” (Destination).