27
D-STAR OPERATION
New2001
New2001
D-STAR GUIDE
■
Updating the repeater list (Continued)
Step 4: Removing the microSD card
Turn OFF the transceiver, then remove the microSD card
from your PC, and insert it into the transceiver’s slot.
TIP:
Icom recommends that you save the current data
before loading other data into the transceiver.
Step 5: Updating the repeater list
SD Card > Import/Export >
Import
1. Push [MENU].
2. Rotate [DIAL] to select “SD Card,” then push [
ï
].
•Displays the SD CARD screen.
3. Select “Import/Export,” then push [
ï
].
•Displays the IMPORT/EXPORT screen.
4. Select “Import,” then push [
ï
].
•Displays the IMPORT screen.
5. Select “Repeater List,” then push [
ï
].
•Displays the REPEATER LIST screen.
Transceiver
microSD
card
PC
From the memory
card reader
6. Select the CSV file to be loaded, then push [
ï
].
•
The confirmation dialog “Keep 'SKIP' settings in Repeater
List?” is displayed.
7. Select <YES> or <NO>, then push [
ï
].
•YES:
Retains the skip settings of the repeater list.
•NO:
Does not retain the skip settings of the
repeater list.
•CANCEL: Cancels to import, then returns to the
REPEATER LIST screen.
•
The confirmation dialog “Import file?” is displayed.
8. Select <YES>, then push [
ï
].
•Starts to import.
L
While importing, “IMPORTING” and a progress bar are
displayed.
9. After importing ends, “COMPLETED!” is displayed.
10. To complete the importing process, reboot the
transceiver.
TIP:
If you copy the ICF file to [Setting] of the microSD
card, the repeater list can be updated with the same
procedures. In that case, select “Load Setting” on the
SD CARD screen. And on the LOAD FILE screen, select
“Repeater List Only.”
(SD Card >
Load Setting
)