30
D-STAR OPERATION
New2001
D-STAR GUIDE
■
Saving settings
When “FROM” (Access repeater) and “TO” (Destination)
settings are saved, the settings can be selected by rotating
[DIAL].
Step 1: Saving settings into memory
1. On the DR screen, select the settings to be saved into
memory .
2. Hold down [MW] for 1 second.
•
The memory contents are briefly displayed, then the
operating data is saved into a blank channel.
• “FROM” and “TO” names are automatically entered as the
Memory name. (Up to 16 alphanumeric characters.)
Step 2: View the saved contents
3. Push [V/M] several times until you enter the Memory
mode.
• Pushing [V/M] toggles between the VFO and Memory modes.
4. Rotate [DIAL] to select the saved channel.
(Example: “003”)
TIP: Checking the Memory contents
You can check the Memory contents on the MEMORY
LIST screen.
Example: Checking the contents of Memory channel 3.
Manage Memory >
Memory CH
1. Push [MENU].
2. Select “Manage Memory,” then push [
ï
].
3. Select “Memory CH,” then push [
ï
].
•Displays the MEMORY CH screen.
4. Select “ALL,” then push [
ï
].
•Displays the ALL screen.
5. Select “003,” then push [
ï
].
• Displays the data in Channel 3 on the MEMORY CH
(003CH) screen.
L
You can select a page by rotating [DIAL].
6. Push [MENU].
•Returns to the standby screen.
