Icom AP-12, Инструкция по эксплуатации

Страница: 76 / 88

62
REFERENCES
7
7-4 Failure in searching for the AP-12 (continued)
r
Enter the desired IP address for the AP-12. The network part must be the same
as the PC’s IP address.
t
Enter the MAC address, described on the serial number seal.
y
Turn the power OFF.
After waiting a few seconds, turn the power ON again.
u
Click <Set IP>.
i
After 30 seconds (approx.: from clicking <Set IP>), click <Close> when the mes-
sage stating that the setting is completed appears.
• Do not turn the power OFF at this stage, as the setting will be erased and return
to the condition in step
r
.
Click 3.
Enter 1.
Enter
2.
Click 2.
Verify
1.
AP-12_USA 02.7.26 9:33 AM Page 62 (1,1)